Condor Pro Nitro Radio Control Buggy RTR

Rating:
95% of 100
Special Price €239.99 Regular Price €259.99
Out of stock
SKU
A3002T
If you want to race off road and on road then the Condor Pro nitro RC buggy is the model for you. With high speed performance and off road capabilities you get the best of both worlds. This model features a 2 speed gearbox, alloy shocks and is fully ball raced. The SE version has a lot of the upgrades pre-installed.
SAVE 8%

The Condor PRO is our favourite model. With high speed performance and off road capabilities you get the best of both worlds. The Condor PRO is the next generation of the standard Condor, upgraded with a two speed automatic gearbox, bigger engine and tough aluminium shock absorbers. It also comes fully loaded with racing ball bearings throughout instead of the standard metal bearings found in most models.

The Condor Pro boasts the high build quality of all Acme models with a strong alloy chassis, shaft driven 4WD system and sealed radio compartments. These nitro radio controlled cars come fully built with radio control included. Just add fuel and a glow start (optional extras available on this page) and prepare for some serious off road fun.

Acme Tech nitro radio controlled cars now come with high quality SH engines. SH engines are made in Taiwan and feature a simplified carb that makes them the easiest to start and most reliable engines on the market. Engines in nitro radio controlled cars usually have two or more tuning needles but these only have a single adjustment that makes them much easier to use without sacrificing any power

 

Box

 

SOLID ALUMINIUM CHASSIS
Strong aluminium chassis with countersunk screws for a flush surface.

 Chassis

 

2 SPEED AUTOMATIC GEARBOX
The two speed automatic gearbox gives faster acceleration in first gear and then switches to the second gear to give a higher top speed.

Gear

 

4 WHEEL DRIVE SYSTEM
This model has a 4 Wheel Drive system with a strong aluminium drive shaft evenly transferring the power from the rear to the front. The 4WD system gives better grip for better handling. These hobby grade RC cars also feature working front and rear differentials that further improves handling.

4WD

 

 

1/10th SCALE
This car measures 430mm x 155mm x 267mm (length, height, width).

Size

 

ADJUSTABLE ALUMINIUM SHOCKS WITH SWAY BARS
Adjustable aluminium oil-filled shocks are mounted to aluminium towers that allow you to adjust the angle and tension. Sway bars are fitted as standard to further improve handling.

Suspension

 

POWERFUL TAIWAN SH .18 ENGINE
SH 18 engine made in Taiwan to ensure the highest quality.

Motor

 

 

75cc FUEL TANK WITH SPLASH GUARD
Spend less time refueling and more time driving.

Tank

 

ENCLOSED RADIO BOX
Receiver is stored in a sealed box to help protect the electronics from splashes and rain.

Radio box

 

ALL NEW 2.4GHz RADIO TRANSMITTER
All new 2.4GHz radio technology is used. This is more reliable than the old FM equipment and allows multiple RC cars to be used in the same area without interference.

Transmitter 

More Information
Model Scale1:10
BuildRTR
Drive4WD
For TerrainOff Road
Radio Equipment2.4 GHz
TypeBuggy
Motor / Engine.18 Nitro
Specifications
  • Width: 267MM
  • Height: 155MM
  • Track: 240MM
  • Length: 430MM
  • Wheelbase: 280MM
  • Gear ratio: 5.69:1 (High), 7.83:1 (Low)
  • Engine: SH .18 size pull start
  • Wheel dia.: 88*34MM(FRONT); 88*41MM(REAR)
  • Ground clearance: 27MM
  • Radio: 2.4Ghz 2CH
Features
  • 1/10 Scale nitro powered car
  • 4WD Shaft drive system
  • Fully ball raced system
  • SH .18 size pull start engine
  • Aluminium oil-filled shocks
  • Two speed automatic gear box
  • Front and rear bevel differentials
  • 75CC Fuel tank
  • Metal disc brake system
  • Pre-painted and cut body shell
  • Sealed box for protecting receiver system
  • Anti-roll bars pre-fitted
  • High quality 2.4Ghz CE approved Radio system with changeable crystals.
  • Steel clutch bell for better durability
Required To Use
  • 4 x AA Batteries and 4 x AAA Batteries
  • Model Fuel
  • Glowstarter
Spares Link/spare-parts/acme-racing/acme-condor-buggy-spare-parts.html

DELIVERY INFORMATION

Delivery cost and time will depend on the size of the items ordered

SPARE PARTS

They will take between 2-5 working days. The cost depends on the number of parts and the size.

Germany: €3.70 - €7.40
Spain: €7.40 - €13.30
France: €7.40 - €11.80
Ireland: €7.40 - €8.90
Italy: €7.40 - €13.30
Netherlands: €5.95 - €8.99
Portugal: €7.40 - €10.30
Denmark: 42kr. - 72kr.
Sweden: 52.80kr - 105.60kr

NORMAL SIZED MODELS

This does not include very large items such as electric bikes, large scooters and quad bikes. Delivery will take 2-5 working days.

Germany: €7.40
Spain: €9.99
France: €8.99
Ireland: €7.40
Italy: €9.99
Netherlands: €8.99
Portugal: €9.99
Denmark: 72kr.
Sweden: 105.60kr

VERY LARGE ITEMS

Very large items such as electric bikes, large scooters and quad bikes. Delivery will take 2-5 working days.

Germany: €49.90
Spain: €49.90
France: €49.90
Ireland: €49.90
Italy: €49.90
Netherlands: €49.90
Portugal: €49.90
Denmark: 499kr.
Sweden: 499kr.

Only registered users can write questions. Please Sign in or Create an account
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
To Top